网站首页/有机反应/金属催化反应/常见钯催化剂的制备
常见钯催化剂的制备

在有机合成中常见的钯催化偶联反应有:Suzuki-Miyaura偶联, Stille偶联, Negishi偶联, Kumada偶联, Hiyama偶联, Sonogashira偶联, Heck反应, Buchwald-Hartwig反应等等。因此常见的钯催化剂应用非常广泛,虽然这些催化剂都已商业化,但对于大规模生产的反应,可以自己制备降低成本。


Pd(PPh3)4的制备



A mixture of palladium dichloride (17.72 g., 0.10 mole), triphenylphosphine (131 g, 0.50 mole), and 1200 ml of dimethyl sulfoxide is placed in a single-necked, 2L, round-bottomed flask equipped with a magnetic stirring bar and a dual-outlet adapter. A rubber septum and a vacuum-nitrogen system are connected to the outlets, The system is then placed under nitrogen with provision made for pressure relief through a mercury bubbler. The yellow mixture is heated by means of an oil bath with stirring until complete solution occurs (ca. 140 ℃). The bath is then taken away, and the solution is rapidly stirred for approximately 15minutes. Hydrazine hydrate (20 g, 0.40 mole) is then rapidly added over approximately 1 minute from a hypodermic syringe. A vigorous reaction takes place with evolution of nitrogen. The dark solution is then immediately cooled with a water bath; crystallization begins to occur at ca. 125℃. At this point the mixture is allowed to cool without external cooling. After the mixture has reached room temperature it is filtered under nitrogen on a coarse, sintered-glass funnel. The solid is washed successively with two 50 ml. portions of ethanol and two 50 ml portions of ether. The product is dried by passing a slow stream of nitrogen through the funnel overnight. The resulting yellow crystalline product weighs 103.5-108.5 g. (90-94% yield).A melting point determination on a sample in a sealed capillary tube under nitrogen gave a decomposition point of 116℃ (uncorrected). This compares with a similar determination(115℃) performed on the product prepared by the method of Malatesta and Angoletta.

Properties:

The Pd(PPh3)4 complex obtained by this procedure is a yellow, crystalline material possessing moderate solubilities in benzene (50 g/L), methylene chloride, and chloroform.The compound is less soluble in acetone, tetrahydrofuran and acetonitrile. Saturated hydrocarbon solvents give no evidence of solution. Although the complex may be handled in air, it is best stored under nitrogen to ensure its purity.


Pd(PPh3)2Cl2的制备



将PdCl2 (50 g, 0.284 mol)和PPh3 (162.5 g, 0.62 mol) 加入苯腈(150 mL)中,氮气置换三次,升温到200℃,反应30 分钟,降温至室温析出晶体,滤出固体,用乙醚洗涤,抽干,得到产品(362 g, 95.8 %)。


Pd(dppf)Cl2的制备




To absolute acetonitrile (1950 mL) degassed via three vacuum/nitrogen ingress cycle was added dichloropalladium (13 g, 73 mmol), the mixture was refluxed at 90~100 °C overnight. The reactant was concentrated to obtain Pd(CH3CN)2Cl2 as orange solid. To a suspension of Pd(CH3CN)2Cl2 (19 g, 73 mmol) in benzene (680 mL) was added a solution of dppf (40.6 g,73 mmol) in benzene (680 mL), the mixture was stirred at rt overnight, the reddish brown precipitate formed was collected by filtration, washed with benzene, and dried in vacuo to give Pd(dppf)2Cl2 (~48 g) in over 90% yield. This is pure enough for the next step, the complex can be recrystallized from chloroform/benzene.



本文转自网络,版权归原作者所有。


纳孚服务
  • 化学试剂
  • 提供稀有化学试剂现货

  • 化学试剂定制合成服务
  • 上海纳孚生物科技有限公司提供市场稀缺的化学试剂定制服务

  • 新材料现货
  • 上海纳孚生物科技有限公司代理或自产包含石墨烯产品,类石墨烯产品、碳纳米管、无机纳米材料以及一些高分子聚合物材料

  • 结构设计及定制合成
  • 可以根据客户需求对所需化合物结构进行设计改性,从而定制合成出客户所需分子式结构

  • 联系我们
  • 021-58952328
  • 13125124762
  • info@chemhui.com
  • 关注我们
在线客服
live chat